There are some situations where you might consider using polyvinyl chloride (PVC) pipe over high-density polyethylene (HDPE) pipe in your application. Here are some reasons:

The company is the world’s best HDPE Pipe Pricing supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

1. Cost: PVC pipe is generally less expensive than HDPE pipe, which can make it an attractive option for applications with tighter budgets.
2. Rigidity: PVC pipe is more rigid than HDPE pipe, which makes it a good choice for applications that require high stiffness, such as water mains or sewer lines.
3. Higher temperature tolerance: PVC pipe can handle higher temperatures than HDPE pipe. PVC pipes can handle temperatures up to 140°F, whereas HDPE pipes have a maximum operating temperature of around 120°F.
4. Compatibility with certain chemicals: PVC pipe is more compatible with certain chemicals, such as acids and bases, compared to HDPE pipe.
5. Higher pressure ratings: PVC pipe has a higher-pressure rating than HDPE pipe, which makes it a better choice for applications that require high-pressure water flow.

It&#;s important to note that each type of pipe has its own strengths and weaknesses, and the choice of which to use will depend on your specific application and needs. Be sure to consider factors such as cost, durability, chemical resistance, pressure rating, and temperature tolerance when selecting a pipe material.

HDPE and PVC pipe have several similarities, but there are important differences that you should understand when choosing a product. At Piedmont Plastics, we want you to have the right plastic for your specific application, and that&#;s why we want to point out these differences.

Both PVC and HDPE are durable and lightweight options for piping in residential and commercial buildings. They carry a low risk of leaks, can carry gas and liquid, and can be used underground and in the water. Both are corrosion-proof and resistant to bacteria and chemical buildup as well. Yet, despite these similarities, distinct differences can dictate which choice is best for your needs.

An

Expert

is just around the corner.

With over 100 years of combined product knowledge and industry experience, we are confident our plastics experts can help you find a solution for your application.

Talk to an expert

First Name

Last Name

Sign me up for special deals and company news.

 

Zip/Postal Code

Message

Differences Between PVC & HDPE

PVC and HDPE have some distinct differences. In general, HDPE is a flexible, strong, and impermeable plastic. PVC is also strong but less flexible and more prone to cracking and failure.

Both pipes can handle standard water pressure surges common in pipelines. However, with PVC, the pipe can handle 100 psi above its pressure class. With HDPE, the pipe can withstand twice the pressure class. In addition, PVC can handle 5.5 feet per second of flow rate before changing its water pressure rating, while HDPE can handle 14 feet per second. Overall, HDPE is 2,500 more resistant to cracking and failure due to water hammer and fatigue.

PVC has a higher pressure class for static water, but HDPE has a higher working pressure rating. In addition, when creating pipe systems, HDPE has a greater bend radius, so it works well for applications that require a curved or bent design.

These two materials also vary in how they are joined. For example, HDPE is joined with heat fusion, while PFC must have a spigot or bell joint with cement. This means HDPE has less of a risk of leaks at the joints.

Finally, HDPE is more durable under extreme conditions. Unlike PVC, it is completely UV resistant and can be installed in extreme temperatures ranging from -40 to 140 degrees. It also has a service life of over a century.

Different Applications of PVC & HDPE Pipe

While the most common use of HDPE and PVC pipe is plumbing, these products have additional applications:

Common HDPE Applications

• Water and gas mains

• Sewage

• Irrigation

• Slurry transfers

• Stormwater and drainage

• Electrical and communications conduits

  If you want to learn more, please visit our website HDPE Gas Piping.

• Mining applications

• Firewater

• Brine lines

• Process chemicals

• Ocean clean-up

• Outtfall lines

Common PVC Applications

• Water mains

• Chemical transfers

• Stormwater drainage

• Sewage

• Household plumbing

• Irrigation

• Underwater Piping

• Exhust fumes

Chemical Resistance and Compatability

HDPE and PVC differ in their resistance to certain chemicals. They have the same chemical resistance for the following:

Acetic acid, Ammonium Sulfate, Ammonium Hydroxide, Borax, Calcium hypochlorite, Ferrous sulfate, Hydrochloric acid, Hypochlorous acid, Phosphoric acid, Sodium bicarbonate, Sodium carbonate, Sodium chloride, Sulfur, Urine, Water, and Saltwater.

Some chemicals had distinct differences. These include:

• Chlorine at 50+ ppm: PVC is more resistant

• Nitric acid: HDPE is more resistant

• Lubricating oil: HDPE is more resistant

• Sodium HypoChlorite: PVC is more resistant

• Sulfuric Acid: HDPE is more resistant at most concentrations

Which Is More Cost -Effective: HDPE or PVC?

Even though HDPE is more durable and flexible than PVC and lasts longer without degradation, it costs a little more than its competition. However, when considering cost-effectiveness, you must look beyond the purchase price.

With HDPE, you don&#;t have to use cement to join pieces. Because it is joined with heat, the process requires minimal wait time. As a result, you do not have to wait for the cement to cure, and you can use your new pipes more quickly.

HDPE is also more cost-effective to transport. You do not have to protect it from sunlight as you do with PVC because it is UV resistant. This combination of less cost and time to install and less cost for transportation helps counter the higher purchase cost.

Finally, HDPE will last longer than PVC in most applications. Not having to replace and repair pipes as often adds up to major cost savings. In light of these factors, HDPE is typically the more cost-effective option.

Get Expert Guidance

If you are curious about whether to choose PVC or HDPE, the sales professionals at Piedmont Plastics can help. Our knowledgeable team will help you learn more about the benefits and drawbacks of each material so that you can choose the best one for your application. Reach out today.

Contact Us Today!

For more HDPE Fittings Suppliers In Uaeinformation, please contact us. We will provide professional answers.