Jul. 08, 2024
ATEX and IECEx may seem similar, but there are some important differences between the two certifications that you should know. To protect the health and safety of your employees, you should be clear on the different requirements that each certification entails. Even though ATEX and IECEx are common terms in the industry, many of us might still be confused on what they stand for. Hence, this article aims to provide you with a clearer understanding on the differences between ATEX and IECEx.
Are you interested in learning more about stainless steel explosion proof control station? Contact us today to secure an expert consultation!
ATEX is derived from the term &#;ATmosphere EXplosibles&#; and it is a mandatory certification for all products to be sold across Europe. ATEX consists of two European Directives that mandate the type of equipment and work conditions allowed in a hazardous environment.
The ATEX /34/EC Directive, also known as ATEX 95, applies to the manufacture of all equipment and products that are used in potentially explosive environments. The ATEX 95 Directive states the basic health and safety requirements that all explosion proof equipment and safety products have to meet in order to be traded in Europe.
The ATEX 99/92/EC Directive, also known as ATEX 137, is aimed at protecting the health and safety of employees who are constantly exposed to potentially explosive working environments. The directive states:
IECEx stands for the certification by the International Electrotechnical Commission for Explosive Atmospheres. To be IECEx certified, all products must go through a monitored process by the International Electrotechnical Commission to ensure that they meet the minimum safety requirements. This process will determine if the products can be used in hazardous or potentially explosive locations.
Being IECEx certified allows the products and equipment to be traded across countries without having to be re-tested and re-certified for every country. As different countries adhere to different safety standards, products from one country have to be re-tested in another country to abide by its guidelines for use in hazardous areas. Therefore, IECEx acts as a common set of safety standards amongst participating countries certification which helps to reduce testing and certification costs for manufacturers. Participating countries in the IECEx Scheme include the majority of countries in Europe, Canada, Australia, Russia, China, United States and South Africa.
The main difference between ATEX and IECEx is that ATEX certification only applies for countries in the EU while IECEx certification is accepted globally. Hence, the IECEx certification is more widely recognised and accepted compared to ATEX certification.
Another key difference between ATEX and IECEx certifications is that ATEX is law-driven while IECEx is standard-driven. The manufacturer is accountable for the entire ATEX certification process for products. On the other hand, the responsibility lies with the external certification party to ensure that the necessary products are IECEx certified.
One fundamental way that ATEX differs from IECEx is the way each certification is set up. The IECEx certification consists of four schemes: IECEx Equipment Scheme, IECEx Conformity Mark License, IECEx Services Scheme, and IECEx Certified Persons Scheme. These four schemes are to ensure that every aspect of the products conforms to the IECEx standard, from the quality of the Ex equipment itself to the competency of the personnel who will be handling such equipment in hazardous environments. On the other hand, the ATEX certification only consists of 2 directives: ATEX 95 and ATEX 137.
Furthermore, ATEX certification can be based on an IECEx test report, but an ATEX documentation may not necessarily support an IECEx certificate. Therefore, it has become a common industry requirement for products to contain both ATEX and IECEx certificates.
Supermec offers an extensive range of explosion proof equipment that carry both ATEX certification and IECEx certification. All ATEX/IECEx certified products are accompanied with the official logos of the certifications for easy reference and transparency purposes.
IECEx, short for â&#;˜The International Electrotechnical Commission System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres&#;, is a global standard focused on ensuring the safety of equipment used in potentially explosive environments. Unlike ATEX, which is mandatory in the EEA under European Union law, IECEx is an international framework recognized worldwide, and part of IEC.
According to the IECEx Management Committee, their voluntary certification system aims to facilitate international trade by providing a consistent set of standards for explosive atmosphere protection. In practice a lot of countries and governing bodies recognize and participate in IECEx, including the UN, most of Europe, China and the USA. This is why IECEx certification is often referred to as â&#;˜global certification&#; when it comes to hazardous area equipment, companies, and services (e.g. repairs).
Whereas ATEX originates form two European Directives, IECEx consists of four schemes, namely:
The design standards, production requirements, and testing methods of both hazardous location certification systems are very similar. Since , the technical standards have become technically identical with only a few exceptions. The EU Directive is updated according to changes in the IECEx schemes. ATEX certification can even be based on an IECEx Test report. Both use the same zone classification system, with Ex zones 0,1,2, and 20,21,22.
Now that we have covered the basics of both IECEx and ATEX, let&#;s take a deep dive into the similarities and differences of both certifications.
Both IECEx and ATEX employ an identical zone-classification system that assesses the level of danger in an environment, guiding the selection of appropriate equipment for use in such areas, as illustrated in the table below.
Danger level in hazardous area IECEx and ATEX Zone ATEX Category IECEx Protection Level Continuous presence of explosive atmosphere 0, 20 1 &#;a&#; Occasional presence of explosive atmosphere 1, 21 2 &#;b&#; Abnormal presence of explosive atmosphere 2, 22 3 &#;c&#;Under ATEX regulations, equipment is systematically classified into two main groupsâ&#;&#;those intended for mining and non-mining applicationsâ&#;&#;and further into categories 1, 2, and 3, reflecting the level of safety required. These groups and categories are shown in the table below:
Equipment Group Equipment Category Description I (Mining) M1 Equipment must remain functional in an explosive atmosphere I (Mining) M2 Equipment must be de-energized in the explosive atmosphere II (Non-mining) 1 High level of protection II (Non-mining) 2 Medium level of protection II (Non-mining) 3 Normal level of protectionDiscover key aspects of ATEX zones and equipment categories for safe operation in hazardous areas in our informative article.
The IECEx system uses protection levels &#;a&#;, &#;b&#;, and &#;c&#; for safe equipment design, which ATEX also uses for intrinsic safety. That&#;s why it can be tricky to tell the difference between the two certifications just by looking at their markings.
Summarizing, under both certifications, the Ex zones are classified in the same manner. The equipment protection level is however designated differently, as shown in the tables above.
ATEX is a set of safety laws from the European Union that all member countries must follow. Even after leaving the EU in , the UK still upholds ATEX laws under its own regulations known as DSEAR.
Additionally, countries outside the EU like have chosen to apply ATEX regulations too.
In these countries, the law dictate that any equipment used in hazardous areas must be ATEX certified.
IECEx certification is not mandatoryâ&#;&#;it&#;s a choice. ATEX and IECEx share the same technical standards; ATEX is based on IECEx standards. If you get an IECEx certificate, you can use it to apply for ATEX certification. That&#;s why you&#;ll often see equipment with both certifications. But the reverse isn&#;t true; ATEX doesn&#;t support the certification process for IECEx certification.
Most countries outside the EU are fine with any proof that equipment is safe in explosive areas.
However, five countries have officially recognized IECEx as an acceptable option within their safety laws, sometimes with a few special conditions:
Some countries, like Brazil, have their own safety standards such as INMetro. But even there, you can base your INMetro certification on an IECEx certificate.
If you want to learn more, please visit our website explosion proof equipment control panel.
The United States and Canada have traditionally used their classes and divisions system to classify hazardous areas. Even though the US has joined the IECEx system, it&#;s still forbidden to use IECEx equipment in an area that&#;s designated by classes and divisions instead of zones. A good thing to remember is that divisions and zones don&#;t mix.
ATEX Zone North American Class North American Division 0 or 20 I or II 1 1 or 21 2 or 22 I or II 2Many countries aren&#;t specific about whether ATEX or IECEx certification is required. They generally ask for certified equipment without stating a preference for one standard over the other. This means that in such countries, both ATEX and IECEx certifications are usually acceptable. This is common in places like the Middle East and Africa, where the focus is on ensuring equipment meets international safety standards for hazardous areas.
ATEX markings are designed to provide necessary information for the correct choice and safe use of equipment in explosive atmospheres. However, markings can be confusing due to a lack of standardization and misalignment with the directive&#;s classification scheme. The specifics of each equipment marking are detailed in user instructions.
If all possible elements are used, some duplication of information may occur. ATEX marking also covers multi-category equipment, Article 1.2 devices (required for safe functioning outside ATEX zones), components (essential for safe functioning but without autonomous function), and assemblies (combination of ATEX equipment).
IECEx markings closely resemble their ATEX counterparts but with notable differences. Unlike the other standards, IECEx does not feature the &#;Ex&#; equipment logo, the CE marking, or designate equipment groups and categories. Furthermore, the process does not involve a Notified Body (ExNB); instead, it relies on an Ex Certification Body (ExCB), which is why the marking includes an ExCB number.
IECEx strictly adheres to ISO/IEC principles, where full conformity with IEC International Standards is compulsory for certification. It&#;s a rule-based system where meeting these international standards is a necessity. There is no room for interpretation.
ATEX, on the other hand, is more flexible. While it mandates compliance with the Essential Health and Safety Requirements (EHSRs) outlined in Annex II, it considers conformity with standards as a pathway or a &#;deemed to comply&#; method. This implies that while ATEX encourages adherence to standards, it doesn&#;t make it an absolute requirement. Manufacturers often use these standards to evaluate their products and to demonstrate their alignment with the EHSRs.
Under ATEX, any recognized standard or local health and safety regulation that matches the EHSRs can be applied. The European Commission provides a list of Harmonised Standards to assist in this. These CEN/CENELEC standards are specially crafted to offer a presumption of conformity with the EHSRs, suggesting that compliance with these standards is a strong indicator of meeting ATEX requirements, although not guaranteed.
It&#;s also worth noting that Ex CENELEC standards are typically technically identical to the corresponding IEC standards, which shows a significant overlap between the two systems.
However, the key distinction lies in the obligatory nature of standards adherence in IECEx, as opposed to the more interpretative approach of ATEX which allows for alternative compliance demonstrations aligned with the EHSRs.
Item ATEX IECEx Certificate Number EU Type Examination Certificate Number CoC Equipment Number CE Marking Required (EU law) Not required, IEC Marking instead Certification NoBo (ExNB) Number ExCB Number Ex equipment logo Required Not included Equipment Group Required EPL Ma or Mb Equipment Category 1, 2 or 3 â&#;˜a&#;, â&#;˜b&#; or â&#;˜c&#; Environment Gas or Dust (G or D) Not includedIn practice, IECEx is stricter with standards, which might seem to offer safer products. ATEX, while also ensuring the same level of safety, provides more flexibility, which can be beneficial for complex engineering challenges. Both systems ensure safety, but the choice may depend on the specific needs of the project.
For IECEx certification, the IECEx Certified Equipment Scheme involves three key documents issued by IECEx Certification Bodies (ExCBs): the IECEx Test Report (ExTR), the IECEx Quality Assessment Report (QAR), and the IECEx Certificate of Conformity (CoC) for equipment.
Similarly, for the Certified Service Facility Scheme and the Certified Competent Person Scheme, IECEx CoCs are issued along with Facilities Assessment Report Forms (FAR) and Personnel Competence Assessment Reports (PCAR), respectively. These certifications are part of a systematic and standardized process detailed in the IECEx Rules of Procedure and Operational Documents, with all technical decisions and certifications publicly accessible on the IECEx online system. We hope you&#;re still with us after all those names and abbreviations..
ATEX certification, handled by Notified Bodies (ExNB), includes EU Type Examination Certificates which document the evaluation and testing against EN Standards, and Ex Quality Assessment Notifications (QAN) that assess the manufacturer&#;s quality assurance system in line with ISO/IEC -34. Unlike IECEx&#;s online repository, ATEX documents are traditionally available in hard copy format.
Both IECEx and ATEX share similarities in their assessment processes for quality assurance, but IECEx provides a more integrated and publicly transparent system with its online certification database, while ATEX follows a more traditional documentation process with paper-based certificates and notifications.
It&#;s crucial to emphasize that ATEX regulations do not necessitate the involvement of a notified body for Category 3 equipment (zones 2 and 22). Manufacturers have the option to self-certify this equipment.
Governance within the IECEx system is designed to unify international certification processes, making sure that all Certification Bodies (ExCBs) and Test Laboratories (ExTLs) maintain a high level of expertise and operate under a single, consistent set of procedures for testing and certification across all hazard zones. This system does not differentiate between zones 0, 1, or 2, aiming for a global standardization of Ex equipment certification.
For ATEX, the approach to governance is more varied, with multiple conformity assessment paths available. The ATEX system allows manufacturers to internally control production and declare equipment safety, emphasizing the manufacturer&#;s responsibility for ensuring compliance with EU directives and the safety of the equipment in its intended operational context. Not all paths under ATEX require third-party intervention, and the system relies on the manufacturer&#;s own declaration of conformity for Category 3 equipment, which can be supported by an IECEx certificate.
IECEx Certification Bodies (ExCBs) and Testing Laboratories (ExTLs) are chosen through a rigorous qualification process which includes an initial peer assessment by an IECEx Assessment Team, ongoing surveillance audits, and re-assessment audits every five years. This process ensures that ExCBs and ExTLs have the necessary technical expertise, equipment, and facilities to conduct proper testing and certification. The assessment and administrative activities are managed by the IECEx Technical Secretariat under the direction of various IECEx committees and supported by specialist working groups.
ATEX Notified Bodies (ExNBGs), on the other hand, are appointed by the national governments of EU member states. Unlike IECEx, there is no common international assessment system for ExNBGs; their surveillance and assessment are subject to the requirements of their respective national governments. ATEX is supervised by an ATEX Working Group and an EU Commission Standing Committee Working Group.
An IECEx Certificate of Conformity (CoC) for equipment is an internationally recognized document issued by an IECEx Certification Body after a product has successfully passed testing and assessment against IEC standards.
On the other hand, an EU Type Examination Certificate, under ATEX, is a document that signifies a product has been evaluated and tested against the relevant EN standards for the European market. It is part of the ATEX certification process and is issued by an ATEX Notified Body.
ATEX also includes the use of a Declaration of Conformity (DoC) for compliance. A prime example of this is our explosion proof air conditioner designed for ATEX-regulated environments. For more details, visit our product page: ATEX Certified Air Conditioner.
Both documents are used as an â&#;˜Ex certificate&#; for hazardous area equipment.
IECEx and ATEX share technically very similar, but their certification processes differ. While both enjoy global recognition, ATEX is obligatory under European law. Unlike ATEX, IECEx omits equipment groups and features distinct categories (â&#;˜a&#;, â&#;˜b&#; and â&#;˜c&#;). Notably, self-certification is allowed for Zone 2 and 22 equipment under ATEX, but this isn&#;t applicable for IECEx, where a Certificate of Conformity (CoC) must be issued by an ExCB.
If you have any inquiries regarding the distinctions and resemblances between the two, feel free to reach out to us!
If you are looking for more details, kindly visit explosion proof junction box china factory.
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!
All Comments ( 0 )