With over 40 years of hands-on experience in electroplating rectification, I have successfully transformed the plating industry in Brazil and now in the USA with the ION brand. My work extends beyond creating advanced plating rectifiers; it&#;s about empowering platers with switch-mode efficiency, digital precision, and innovative pulse plating techniques. I have helped numerous businesses enhance their operations, proving the real-world impact of my technology. My dedication to practical, cutting-edge solutions continues to drive significant improvements in the electroplating sector globally. I hope this article proves helpful to you. &#; Josue Zazulla

Kehong Product Page

Getting an Accurate Quote

When you are in the market for an electroplating rectifier, you should have specific information and specifications on hand to ensure you get an accurate and relevant quote. Here are the key specifications and information we need to know in order to find the right rectifier for your application:

Input Power Requirements:

• Voltage: Determine the input voltage available at your facility (e.g., 110V, 220V, 380V, etc.).
• Phase: Specify whether your power supply is single-phase or three-phase.

Output Power Specifications:

• Voltage Range: The output voltage range you need for your plating processes.
• Current Range: The maximum current requirement for your plating operations.
• Power Rating: The overall power rating needed, usually measured in kW or HP.

Rectifier Type: Whether you need a DC rectifier, pulse rectifier, or any specific type suited to your plating process.

Control and Regulation: Type of control required (e.g., manual, analog, digital) and the degree of control precision needed for your plating processes.

Ripple Factor: The acceptable level of ripple in the output current, which can affect the plating quality.

Cooling System: The type of cooling system required (air-cooled, water-cooled, etc.).

Size and Installation Requirements: Physical dimensions and weight if you have space limitations and specific installation requirements, like environmental conditions.

Safety Features: Requirements may include overload protection, short circuit protection, and emergency stop functionality.

Additional Functionalities: Any noteworthy features like remote monitoring, programmable settings, ramping capabilities, etc.

Compliance and Standards: Any specific industry standards or compliance requirements the rectifier must meet.

Budget and Cost Considerations: Your budget range can help in finding a rectifier that fits your financial plan.

Warranty and Support: What type and length of warranty are you looking for, and what is the availability of after-sales support and maintenance services?

Providing these details to suppliers will enable them to give you a more accurate and tailored quote, ensuring the rectifier meets your specific electroplating needs.

Types Of Rectifier Units

Plating rectifiers come in various types, each with unique advantages and disadvantages. Here&#;s a brief overview:

Silicon Controlled Rectifier (SCR) Rectifiers:

Advantages:

• High power factor and efficiency, but only when used at close to maximum voltage. (inefficient for job shops)
• Suitable for heavy-duty applications.
• Durable and reliable for long-term use.

Disadvantages:

• Larger and heavier compared to other types.
• Less precise control of voltage and current.
• Generates more heat, requiring cooling systems.
• Air-cooled units can be very noisy.

Switch Mode (Switching) Rectifiers:

Advantages:

• Highly efficient and energy-saving.
• Compact and lightweight, ideal for space-limited environments.
• Offers precise control over voltage and current with high-speed response.
• Generates less heat, often reducing the need for elaborate cooling systems.

Disadvantages:

• More complex circuitry, which can be more expensive to repair.
• It may produce electrical noise (EMI), requiring filters.

Tap Switch Rectifiers:

Advantages:

• Simple and robust design.
• Relatively inexpensive.

Disadvantages:

• Lower precision in control.
• It&#;s bulkier than switch mode rectifiers.
• As an older technology, replacement parts are getting difficult to find.

The Switch Mode Rectifiers stand out for their efficiency and precise control capabilities, making them ideal for applications where space and energy consumption are critical concerns. Their ability to finely tune the output ensures optimal conditions for various plating processes, contributing to higher-quality finishes.

Overall, the type of rectifier you should choose depends on the specific requirements of the electroplating process, including factors like the type of metal being plated, the desired thickness and quality of the plating, and the production scale.

Personal Aside:

Based on my experience and understanding of the industry&#;s needs, I assume many would opt for the switch-mode rectifier. One compelling reason for this choice is these units&#; significant electricity savings. In several instances, I&#;ve observed that reducing energy costs alone can offset the expenses of upgrading to a switch-mode rectifier within a year or even less in some cases.

Furthermore, the consistency of the digital control systems in switch-mode rectifiers cannot be overstated. In my work assisting various plating shops, I&#;ve consistently seen how this precision control transforms their operations. The ability to accurately and reliably control the plating process has proven to be a game-changer. It leads to higher-quality plating results and enhances the overall efficiency and productivity of the plating process.

In conclusion, while the initial investment in a switch-mode rectifier might appear substantial, the long-term benefits &#; cost savings and operational improvements &#; make it a wise and profitable choice for many in the electroplating industry. With that in mind, let&#;s dive deep into the details of these modern marvels.

Key Benefits in Modern Switch-Mode Plating Rectifiers

The importance of Precision Digital Control:

Precision digital control in plating rectification is crucial for several reasons, particularly when compared to other control methods like tap switches.

1. Accuracy and Consistency: Digital control systems offer high accuracy in setting and maintaining the desired voltage and current. This precision ensures consistent electroplating quality, as even minor fluctuations can affect the plating&#;s thickness, texture, and overall quality.
2. Programmability and Automation: Digital controls can be programmed for specific plating requirements, allowing for automated adjustments during the plating process. This leads to more efficient operations and can reduce the need for manual intervention.
3. Real-time Monitoring and Adjustments: Digital systems enable real-time monitoring and instant adjustments to the rectifier&#;s output. This responsiveness is key to maintaining the optimal conditions for the plating process, especially for complex or sensitive applications.
4. Data Logging and Analysis: With digital control, it&#;s easier to log and analyze the performance over time. This information can be used for quality control, process optimization, and troubleshooting.
5. Integration with Other Systems: Digital controllers can be easily integrated with other plant management systems, allowing for centralized control and monitoring of the electroplating process.

Efficiency of Switch Mode Plating Power Supplies:

Switch mode plating power supplies, like those from ION Rectifiers, are highly efficient for several reasons, leading to significant energy savings in electroplating applications.

1. High Efficiency: ION&#;s switch-mode-based rectifiers offer approximately 95% efficiency, significantly higher than traditional SCR (Silicon Controlled Rectifier) types.
2. Energy Savings: Unlike SCR-type rectifiers, switch-mode rectifiers can lead to up to 80% energy savings, depending on the application. This substantial reduction in energy consumption is due to the more efficient electrical power conversion.

Switch Mode Power Supplies (SMPS) are generally more energy efficient than Silicon Controlled Rectifier (SCR) based units due to several technical reasons:

1. Switching vs Linear Operation: SMPS operate by rapidly switching the power transistors between full-on and full-off states, which significantly reduces the time they spend in the high-resistance, high-power-dissipation state. This switching action is far more efficient than the linear regulation method used in SCR units, where power transistors continuously adjust their resistance to regulate the output voltage, resulting in higher energy loss due to heat.
2. Power Conversion Method: SMPS convert the AC input to DC, then use high-frequency switching to transform this DC to the desired output voltage. This method is inherently more efficient than the phase control method used in SCR units, where the SCR adjusts the phase angle of the input AC voltage to control the power delivered to the load. This phase control method can be less efficient, especially at lower power levels.
3. Heat Dissipation: Due to their high efficiency, SMPS generate less heat compared to SCR units. Less energy is wasted as heat, which not only improves efficiency but also reduces the need for heat sinks and cooling mechanisms, further contributing to energy savings.
4. Size and Weight: SMPS are typically smaller and lighter than SCR units. This is because the high-frequency transformers in SMPS can be much smaller than the low-frequency transformers in SCR units for the same power rating. Smaller transformers are generally more efficient as they have fewer core and copper losses.
5. Power Factor Correction: Modern SMPS often include power factor correction (PFC) circuits, which improve the power factor and reduce reactive power consumption. This leads to more efficient use of the power grid, reducing energy losses in the distribution system. SCR units typically have a lower power factor and can draw more reactive power.
6. Adaptive Control: SMPS can include sophisticated control circuits that adapt to changing load conditions to maintain high efficiency across various operating conditions. On the other hand, SCR units may not adjust as efficiently to changing loads, leading to lower efficiency under certain conditions.

In summary, the high efficiency of SMPS is due to their method of operation, which minimizes the time spent in high-power dissipation states, along with the use of high-frequency components, effective heat management, and adaptive control mechanisms. These features collectively contribute to the higher energy efficiency of SMPS compared to SCR-based power supplies.

Case Study: Anodizing Shop Switches to ION Switch Mode Rectifier:

• Background: An anodizing shop had been using an ancient SCR-type rectifier. The shop faced high energy costs and inconsistent plating quality due to the inefficiency and limitations of the SCR rectifier.
• Switch to ION Rectifier: The shop upgraded to an ION switch mode rectifier, drawn by its promise of higher efficiency and better control.
• Results:
  • Energy Savings: The shop experienced a dramatic 89% reduction in energy consumption when anodizing the same parts, attributed to the high efficiency of the ION switch mode rectifier.
  • Improved Quality: In addition to energy savings, the shop noted a significant improvement in the consistency and quality of the anodizing, leading to fewer rejects.
  • Cost Efficiency: Reducing energy consumption translated into substantial cost savings, improving the shop&#;s profitability.
• Impact: The switch enhanced the anodizing shop&#;s operational efficiency and contributed to a more sustainable and environmentally friendly operation.

This case study illustrates the potentially transformative impact of switching from an older SCR-type rectifier to a modern, efficient ION switch mode rectifier in an electroplating or anodizing setting. The benefits extend beyond energy savings, improving process control, product quality, and overall operational efficiency.

Why Modern Low Ripple Power Supplies are Important in Electroplating:

Ripple is a crucial factor in electroplating because it directly affects the quality and consistency of the plating finish. Understanding current and voltage ripple impacts on the electroplating process is vital for achieving optimal results.

1. Surface Finish Quality: A high ripple can lead to uneven deposition of the plating material, resulting in a rough or inconsistent surface finish.
2. Plating Thickness Uniformity: Ripple can cause variations in the deposition rate, leading to non-uniform thickness across the plated surface.
3. Material Properties: Excessive ripple can adversely affect the microstructure and physical properties of the plated layer, like hardness and stress.
4. The efficiency of the Plating Process: A stable current and voltage ensure a more efficient plating process with better control over the deposition rates and energy consumption.

Difference Between Current Ripple and Voltage Ripple:

1. Current Ripple:
   • Refers to the direct current (DC) fluctuations flowing through the electroplating bath.
   • A high current ripple can cause uneven metal deposition, leading to a non-uniform thickness of the plated layer.
   • It is typically expressed as a percentage of the average current. For example, a 5% current ripple on a 100-ampere system means the current varies between 95 and 105 amperes.
2. Voltage Ripple:
   • Refers to the fluctuations in the voltage applied to the electroplating bath.
   • Voltage ripple can affect the driving force for the electroplating reaction, impacting the deposition rate and the quality of the plating.
   • It is also expressed as a percentage of the average voltage. A lower voltage ripple is generally desirable for smoother and more uniform plating.

While both high current and voltage ripple affect plating results, current ripple is often given more attention in electroplating because the current directly controls the metal deposition rate. High-quality rectifiers minimize current and voltage ripple, ensuring a more stable and controlled electroplating process. Minimizing ripple is especially important in precision applications where uniformity and surface quality are critical.

Contact us to discuss your requirements of electroplating rectifier for sale. Our experienced sales team can help you identify the options that best suit your needs.

Advantages of Water-Cooled and Corrosion-Resistant Rectifiers:

1. Enhanced Cooling Efficiency: Water cooling is more efficient than air cooling for high-power applications, providing superior heat dissipation.
2. Reduced Environmental Control Needs: Corrosion-resistant rectifiers eliminate the necessity for environmentally controlled rooms, saving on construction and maintenance costs.
3. Extended Equipment Lifespan: The combination of water cooling and corrosion resistance significantly increases the rectifier&#;s lifespan by reducing thermal stress and protecting against corrosive elements.
4. Lower Maintenance Costs: These rectifiers require less maintenance, reducing ongoing operational costs.
5. Improved Workplace Safety: The reduced risk of overheating and electrical faults enhances workplace safety.
6. Space-Saving Design: Water-cooled rectifiers can be more compact than air-cooled alternatives, conserving facility space.
7. Optimal Performance in High-Temperature Areas: Water cooling is especially beneficial in maintaining optimal operating temperatures in high ambient environments.
8. Low Noise Operation: A significant advantage of water-cooled systems is their low noise output compared to air-cooled systems, which often require fans and other moving parts that generate noise. Reducing noise pollution creates a more pleasant and less disruptive working environment and can be crucial in meeting workplace noise regulations.

In summary, installing water-cooled, corrosion-resistant rectifiers ensures safe, efficient, and long-lasting operation in an electroplating facility. These rectifiers offer considerable benefits, including cooling efficiency, cost savings, reduced maintenance, enhanced safety, space efficiency, and, notably, a quieter working environment. These attributes make water-cooled, corrosion-resistant rectifiers an advantageous choice for any plating operation.

Personal Aside:

When selecting the right rectifier for your plating needs, it&#;s crucial to compare different types, like apples to oranges. I&#;ve observed a significant distinction between air-cooled units or those constructed from powder-coated steel and the more advanced, corrosion-resistant water-cooled units.

The former often necessitates the construction of environmentally controlled rooms or involves long bus bar runs. These additions are not only expensive but can also reduce overall efficiency. That&#;s precisely why I prioritized corrosion-proof cases in my design of ION units. This design allows these units to be placed right near the plating line. Such proximity is not just a matter of convenience for the operators; it&#;s also a strategic move to enhance efficiency and ease of use.

Moreover, durability is a crucial factor. The ION units are built to last for decades. This isn&#;t just a claim; it&#;s a proven fact, with units operating flawlessly after over 20 years of service. This longevity is a testament to the effectiveness and reliability of water-cooled, corrosion-resistant construction. It&#;s an investment that pays off in the long run, not just in terms of durability but also in maintaining high efficiency and operational ease.

In conclusion, while the initial choice might seem daunting, opting for a unit with a corrosion-proof, water-cooled design yields long-term benefits, both in terms of performance and cost-effectiveness. In my experience, it has consistently proven its worth.

Benefits of Easy Maintenance and Repair:

Units that are easy to maintain and repair, like ION rectifiers, provide significant benefits in industrial settings, particularly in electroplating facilities. These rectifiers are designed with features that simplify maintenance and troubleshooting, leading to enhanced operational efficiency and reduced downtime. Let&#;s discuss these benefits in detail:

1. Reduced Downtime: Quick and easy access to rectifier components for maintenance and repair means less downtime. In industrial operations, reduced downtime directly translates to increased productivity and profitability.
2. Lower Maintenance Costs: Simplified maintenance procedures mean onsite staff can often carry out repairs without requiring specialized technicians, significantly reducing maintenance costs.
3. Extended Equipment Lifespan: Regular and easy maintenance helps keep the rectifier in optimal condition, extending its lifespan and reducing the need for frequent replacements.
4. Improved Operational Efficiency: Easy access to components and straightforward repair processes ensure rectifiers operate at peak efficiency, supporting consistent and high-quality electroplating results.
5. Enhanced Safety: Regular maintenance reduces the risk of equipment failure and potential safety hazards, contributing to a safer work environment.

Specific Features of ION Rectifiers for Maintenance and Troubleshooting:

1. Engineered for Quick Access: ION rectifiers are designed to allow quick and easy access to internal components. This design feature is crucial for routine maintenance tasks like cleaning, inspection, and part replacement, making the process less time-consuming and more efficient.
2. Troubleshooting Help Screens: These rectifiers come equipped with troubleshooting help screens, an invaluable tool for operators. These screens can guide the operator through diagnostic procedures, helping to identify and resolve issues quickly.
3. Fault Detection and Analysis: Advanced fault detection capabilities allow for prompt identification of issues, preventing minor problems from escalating into significant failures.
4. User-Friendly Interface: The interface on ION rectifiers is designed to be intuitive, making it easier for operators to understand and carry out necessary maintenance and repair tasks without extensive training.
5. Detailed Documentation and Support: Comprehensive documentation and customer support are typically provided, offering guidance on maintenance procedures, troubleshooting, and repairs.

The ease of maintenance and repair of units like ION rectifiers is a significant advantage in the electroplating industry. These features not only reduce operational costs and downtime but also enhance the overall efficiency and longevity of the equipment. By ensuring quick and easy access for maintenance and offering sophisticated troubleshooting aids, ION rectifiers help maintain continuous, high-quality electroplating operations.

The Benefits of Modular Design and Expandability:

Modular design and expandability are key features in industrial equipment like ION rectifiers, offering significant benefits for electroplating and other applications. These features allow for a flexible approach to configuring and scaling operations, adapting to changing demands and capacities. Let&#;s delve into why modularity and expandability are important and how ION rectifiers capitalize on these aspects:

Scalability: One of the primary advantages is scalability. As your business grows or your operational needs change, the ability to add more units or reconfigure the existing setup is invaluable. This scalability ensures that your investment remains relevant and effective over time.
Customization to Specific Needs: Modular systems can be customized to meet specific requirements. Whether you need higher power, different voltage or current ranges, or special features, modularity allows you to tailor your setup to your exact needs.

Cost-Effectiveness: Modularity can be more cost-effective in the long run. Instead of purchasing a whole new system when requirements change, you can simply add or reconfigure modules. This approach can result in significant cost savings.

Redundancy and Reliability: In a modular system, if one unit fails, the others can continue to operate, reducing the impact on overall production. This redundancy enhances the reliability of your operations.

Space Efficiency: Modular units are often designed to be compact and can be arranged in various configurations to fit into available space, making them ideal for facilities with limited space.

Ease of Maintenance and Upgrades: Modular systems are generally easier to maintain and upgrade. Individual modules can be serviced or replaced without affecting the entire system.

Chaining in Series or Parallel

Combining units in series or parallel offers almost unlimited possibilities in terms of power output. This flexibility is crucial for meeting diverse and changing production requirements. Each ION rectifier unit maintains its performance characteristics even when chained together, ensuring the system delivers consistent and reliable output. The modular nature of ION rectifiers allows them to be easily integrated with existing systems, facilitating expansion or upgrades with minimal disruption.

Series Configuration: When ION rectifiers are chained in series, the voltage capacity increases while maintaining the same current. This is particularly useful when high voltage is required, as in certain types of electroplating or anodizing processes.

Parallel Configuration: Chaining rectifiers in parallel increases the current capacity while keeping the voltage constant. This is ideal for processes that require high current at a constant voltage.

In summary, the modularity and expandability of ION rectifiers present a versatile and cost-effective solution for electroplating facilities, adapting quickly to evolving business needs. This flexibility, combined with the potential for customization, redundancy, and space efficiency, makes modular systems like ION rectifiers an excellent choice for businesses looking to optimize their electroplating processes with scalable, reliable, and efficient power solutions.

Tips on Installing Rectifiers:

Installing rectifiers in an electroplating facility requires careful planning and consideration to ensure the equipment&#;s safety, efficiency, and longevity. Choosing water-cooled and corrosion-resistant rectifiers brings significant advantages, including lower noise levels, which is crucial in creating a more comfortable and compliant work environment. Here are some tips on installing rectifiers and the advantages of opting for water-cooled, corrosion-resistant models:

Assess Electrical and Cooling Requirements: Ensure your facility&#;s electrical infrastructure can handle the rectifier&#;s power requirements and that the cooling system has an adequate water supply and plumbing.

Effective Water Cooling System: Install a reliable water cooling system for the rectifier, ensuring proper water flow and temperature control for efficient heat dissipation.

Accessible and Safe Location: Place the rectifier in an easily accessible location for maintenance and inspection while ensuring it is safe from regular workplace traffic.

Safety Compliance: Adhere to all safety guidelines for electrical installations and water cooling systems, including proper grounding of the rectifier and compliance with local codes.

Proximity to Plating Bath: Install the rectifier close to the electroplating bath to minimize voltage drops, energy losses, and the need for long bus bars.

Professional Installation: Consider professional installation for integrating the water cooling system with the electrical equipment, ensuring safety and standard compliance.

Final Tips to Consider

When purchasing rectifiers for electroplating or other industrial applications, making an informed decision is crucial. Here are some final tips to consider, focusing on support, ethical considerations, and financial options:

1. Assess the Quality of After-Sales Support:
   Technical Support: Ensure the manufacturer provides comprehensive technical support. This includes assistance with installation, troubleshooting, and any technical issues that may arise.
   Warranty: Check the warranty period and what it covers. A longer warranty period can indicate confidence in the product&#;s reliability.

• Availability of Spare Parts: Confirm the availability of spare parts and the ease of obtaining them. This is crucial for minimizing downtime in case of repairs.

2. Consider the Ethical and Geopolitical Aspects:
   Manufacturing Ethics: Research the manufacturer&#;s labor practices. Avoid products made using slave labor or under unethical working conditions.
   Country of Origin: Be aware of the geopolitical implications of the country of manufacture. Products from potentially adversarial countries might pose risks regarding supply chain reliability or political considerations.

3. Financial Considerations and Cash Flow Management:
   Lease-to-Own Options: Some manufacturers or suppliers offer lease-to-own options. This can be an intelligent way to improve cash flow, as it allows for the spread of payments over time rather than a significant upfront investment.

   Total Cost of Ownership: Consider not just the purchase price but the total cost of ownership, which includes maintenance, operating costs, and potential savings in energy efficiency.

   Financing Options: Explore different financing options. Some suppliers might offer favorable terms, or bank loans or grants might be available, especially for energy-efficient or environmentally friendly technologies.

4. Evaluate Technical Specifications:
   Ensure the rectifier meets your specific technical requirements regarding voltage, current, control precision, cooling method (water-cooled or air-cooled), and modularity.
5. Compatibility with Existing Systems:
   Verify that the rectifier can seamlessly integrate with your existing systems and processes. This includes checking compatibility with any automation or control systems in place.
6. Environmental Impact: Consider the environmental impact of the rectifier. More energy-efficient models not only save costs but also align with sustainable practices.
7. Customization and Scalability:
   Determine if the rectifier can be customized to your needs and if it offers scalability to accommodate future expansion.

Making a well-informed decision when purchasing a rectifier will ensure you select a product that meets your current needs and aligns with your ethical standards, financial considerations, and long-term business goals.

The ION Plating Rectifier Difference

ION Rectifiers have advanced technical features designed to reduce rejects and ensure consistent, high-quality work in electroplating and surface finishing processes. These features include:

1. Control Details:
   • Digital Controller: A 7-inch HMI touchscreen ( LCD Display ) is standard, providing an intuitive, user-friendly interface for precise control.
   • Wireless Controller Option: An optional 7-inch HMI touchscreen wireless controller allows for remote operation.
   • Wireless Remote Range: The system offers a wireless remote range of over feet, facilitating ease of control even in large industrial settings.
   • Multi-Unit Control: The ability to control up to 32 units with a multi-unit wireless remote or up to 250 units with an optional PC-based program enhances scalability and flexibility in operations.
2. Operation Modes:
   • Manual and Programmable Timers: Includes on/off manual operation and ten independent programmable timers for tailored operation.
   • Ampere and Time Counters: Features ten independent Amp X min or Amp X hour counters plus one total counter, aiding in precise process control.
   • Customizable Recipes: Offers ten independent recipes for specific applications like decorative chromium, precious metals, selective plating, and thickness operation programs for precise plating control.
3. Electrical Specifications:
   • Versatile Input Voltage Options: Compatible with multiple input voltages (240V, 380V, 440V, 480V).
   • Frequency Options: Can operate on both 50Hz and 60Hz frequencies.
   • Output Range: Capable of delivering a single unit output from 300 Amp to Amp and 0-50V.
   • Modularity: All units can be combined either in series (for the same current) or parallel (for the same voltage), offering flexibility in configuration.
4. Performance:
   • Low Ripple: Ripple is maintained at &#;2%, ensuring consistent quality in the electroplating process.
   • High Power Factor: Offers a power factor of 0.95 for low energy consumption.
   • Digital Regulation Range: Provides a digital regulation range from 0 to 100% with calibrated exact control precision, allowing for precise control over the electroplating process.
5. Construction:
   • Durable Build: Features corrosion-proof IP65 molded fiberglass (NEMA Type 4, 4X, 12, and 13) or Polycarbonate (IP65) enclosures.
   • User-Friendly Interface: Equipped with a 7-inch color touch screen control panel.
   • Easy Maintenance: Designed with easily replaceable power modules.
6. Protection Features:
   • Electronic Protection: Includes line fault and output overload electronic protection.
   • Voltage Detection and Logging: Capable of line voltage detection and logging.
   • Safety Alarms: Features an internal over-temperature alarm and a thermal magnetic trip circuit breaker.
   • Fault Isolation: Programmable fault isolation enhances safety and reliability.
7. Automation Capabilities:
   • Process Maintenance Alerts: Offers 5 Amp X min or Amp X hour independent programs for maintenance alerts.
   • Dosing Pumps Control: Can control up to 3 independent dosing pumps (optional).
   • Integrated PLC: Features a 4 input x 4 output integrated PLC (optional), providing additional automation capabilities.

These advanced features collectively ensure that ION Rectifiers facilitate efficient and cost-effective operations and significantly enhance the electroplating process&#;s quality and consistency. The precise control, automation capabilities, and robust construction make ION Rectifiers reliable for reducing rejects and achieving high-quality results in electroplating and anodizing applications.

Power Supplies / Rectifiers

Power Supplies / Rectifiers

A DC power source is required to operate any plating or anodizing operation.

Some of our customers manage to plate using a 6 or 12 volt battery, or charger, and bulbs as a current control. This article explains a variety of low cost ways to obtain and control your plating power requirements.

However these rectifiers, designed specifically for the job, will enable the experienced plater to reach very tight tolerances and controls, and are much more convenient than the bulb method.

Need Help Choosing Your Power Supply. Use Our New Rectifier Selection Tool

The company is the world’s best a Water Cooled Rectifier supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.