Oct. 28, 2024
Mechanical Parts & Fabrication Services
A lead screw is a type of mechanical power transmission used in machines for high-precision actuation. It converts rotational motion into linear motion. Other names for a lead screw (or leadscrew) are power screw and translation screw.
For more information, please visit our website.
Lead screws are sometimes confused with threaded rods. Although they might look identical to an untrained eye, the threads on a threaded rod are a lot finer. Thus, increasing the risk of thread deformation under load.
In this article, well take a closer look at different lead screw types, their design, use-cases, advantages and disadvantages. So lets get to it.
What is a Lead Screw?
Lead screw is a power transmission linkage used in modern machines. It can generate very high forces with a small moment, thus providing a large mechanical advantage. It can be thought of as a wedge wrapped around a cylindrical rod.
In applications such as screw jacks and mechanical presses, it is used to create large forces. They also find use in applications needing extremely precise motion transfer and control, such as linear actuators and linear stages.
As the sliding contact area between the screw and the nut is high, a lead screw has more friction losses compared to other alternatives such as gear trains and chain drives. This characteristic generally limits a lead screws use to light- and medium-duty applications.
How Does a Lead Screw Work?
A lead screw works in one of two ways:
In the first case, manually applied force or a motor rotates the nut. This pushes the nut along the shafts axis. Ultimately, the torque applied to the nut is transformed into linear motion.
In the second case, the nuts rotational motion is restricted and the screw shaft rotates. The nut moves along the screw axis in the process. Thus, the torque on the screw shaft converts into linear motion of the nut.
Lead Screw Components
The lead screw itself is a small component in many complex assemblies. But even a basic lead screw can be broken down into three main components/features. These are:
The screw shaft is a cylindrical rod with threads or grooves along its length. At times, it may be referred to as an ACME rod, buttress rod or square-threaded rod as per the thread geometry. The most common materials used for lead screw shafts are carbon steel, stainless steel and aluminum. PTFE-based coatings are often used in harsh environments for durability and to remove the need for oil and grease.
The threads are present on the screw shaft and the nut. Although it is not a separate component in itself, the threads structure is responsible for converting rotational motion into linear motion. The external threads are in direct contact and mesh with the nuts internal threads.
The nut is a fairly simple component but does not offer much use by itself. Typically, it will have some means, such as tapped or through holes, to connect it to supporting components like a clamp. The clamp connects the nut to a guide rail, restricting the nuts rotation and only allowing linear motion. Nuts can be made from plastic or bronze to add self-lubricating properties.
Apart from these components, lead screws may require additional parts depending on the function. For instance, to control backlash, precision lead screws are fitted with loaded springs that create an axial load to prevent unintended axial movements.
Scale Your Manufacturing from Prototyping to Series
Personal account manager
Quality assurance
Payment terms for companies
On-time delivery by Fractory
Lead Screw Design
The lead screw is a fairly straightforward actuator with few components and a simple yet effective design. But an engineer must be aware of certain lead screw terminologies to understand, manage and develop products that use lead screws. The following terms come up in lead screw design.
Crest and root
For a lead screw, the top of the thread is known as the crest. Similarly, the base of the thread where it connects to the screw shaft is known as the root of the lead screw.
Major, minor and pitch diameter
Major diameter is the distance of the thread crest from the shafts center axis measured perpendicular to the axis. Minor diameter is the distance of the thread root from the center axis. Pitch diameter is the diameter at which the screw threads contact the threads on the nut.
Helix and lead angle
The angle formed between the helical thread with the perpendicular axis of the lead screw shaft is known as the helix angle. A larger helix angle requires more torque to move the nut but it results in lower friction losses, thus making the setup more efficient.
The lead angle is the complementary angle of the helix angle. It is the angle between the helical thread and the axis of rotation.
Number of starts
A start refers to the starting point of a thread at the end of the screw shaft. When greater speeds and loads are required of the lead screw system, the screw shaft may have more than one start. It may have one, two, or four starts. Screws with multiple starts are basically independent threads running parallel to each other in the helical path around the shaft.
Screw lead and pitch
Screw lead is the linear distance moved by the nut in one revolution (360°) of the nut or the shaft. The smaller the lead, the tighter the thread, resulting in more precise linear motion.
The pitch is the distance between two adjacent crests or troughs measured parallel to the axis of rotation.
For single start screws, lead and pitch values are equal. In the case of multiple starts, the pitch is multiplied by the number of starts to obtain the lead.
Types of Lead Screw Threads
Lead screws are classified on the basis of their thread geometry. Threads used in lead screws must have high precision, accuracy and strength. Three of the most common types of threads used in lead screws are:
Square thread
The square thread has square-shaped threads whose flanks are perpendicular to the axis of the lead screw. This 0° thread angle prevents any radial pressure on components and reduces friction between them.
This design also minimises the contact surface between the nut and the screw. Thus, square threads have the lowest friction losses and the highest efficiency. As a result, they provide greater load-bearing capabilities for the same dimensions or require smaller motors for the same load transfer. Square threads are, therefore, the first choice in motion transfer and heavy load applications.
Square threads are also desirable in products that need to be compact in size while maintaining their functional requirements. However, these threads are the most difficult and expensive to machine out of all the different types. In most cases, they require a single-point cutting tool for fabrication.
Acme thread
The acme thread is a trapezoid-shaped thread with a thread angle of 29°. It is based on the imperial standard but is accepted throughout the world.
This thread was developed as a stronger alternative to the square thread. Due to the sharp 90° angle between the flank and the root, square threads are relatively weak at the base. Widening the base adds strength as well as makes it easier to machine. Multi-point cutting tools can be used more easily to machine acme threads than square threads.
Many times, acme threads are incorrectly referred to as trapezoidal threads. The trapezoidal thread follows the metric standard and has a thread angle of 30°. The exact specifications for trapezoidal threads can be found under DIN 103.
Link to yiyuan
Buttress thread
The buttress thread is a triangular-shaped thread that is used when force needs to be transmitted in one direction only. It has a 7° inclination on the load flank and a 45° inclination on the trailing flank.
Such a steep inclination enables it to carry the load as efficiently as square threads while the trailing flank adds additional strength thanks to the wider base. This thread is also very precise and can be used to create small accurate movements in one direction. Buttress threads exhibit poor performance when the axial load is applied in the other direction.
Lead Screw Application Examples
Lead screws are available in virtually every size and thus, they serve in a wide range of applications. In day-to-day use, lead screws are found in appliances such as printers, disc drives, lifting equipment and robots.
In industries, lead screws are present in machines such as lathes, vices, jacks and CNC machines. Processes like engraving, fluid handling, data storage, rapid prototyping, 3D printing, measuring and inspection rely extensively on high-precision lead screws.
The smallest commercially available lead screws can be as small as 0.5 mm in diameter. But for special cases, modern manufacturing methods can fabricate lead screws even smaller in dimensions. These special screws are used in medical devices for automated surgery and drug delivery. The medical industry also requires precision lead screws for medical imaging equipment such as X-ray, MRI, IMRT, PET and CT scan machines.
The Difference Between a Lead Screw and a Ball Screw
Ball screws are an alternative to lead screws offering similar functions. Sometimes they are even categorized as a type of leadscrew. The decision of whether to choose a ball screw or a lead screw can be a confusing one because of the similarities between the two.
Ball screw uses metal balls found in ball bearings for motion transfer. Instead of having internal threads, ball screws house balls in the lead screw nut. These balls fit into the grooves on the screw and are responsible for power and motion transfer. The balls have a small contact area with the lead screw shaft, resulting in very low friction. This reduces running temperatures and imparts high efficiency. A ball screw also has higher positional accuracy, speed and lead options.
The main drawbacks of ball screws are that they are expensive, dont have self-locking properties and are not as shock-resistant as lead screws. Theyre generally also a bit bulkier than lead screws and are
How to Select the Right Power Screw for Your Application
Every application is unique. The designer must understand the constraints and the service conditions before making a decision. This selection will not only affect the product design but also dictate the overall system performance.
However, due to the wide variety of screw types and sizes, choosing the right one can be a daunting task. Heres an overview of the most important power screw features to consider when making the selection.
Load capacity
The load capacity of a power screw is the most important factor in the selection process. The service load affects many power screw features. For starters, the diameter of a lead screw is directly proportional to the required thrust.
There are two types of loads peak and continuous. Peak load refers to high forces during sudden acceleration or deceleration and can be up to five times the continuous load. Continuous load is a calculated average value (RMS value) and sometimes applies consistently over the nuts entire travel distance. It also directly affects the L10 life of a component. An engineer must consider both values and go for a design that can manage all the expected loads.
Plastic lead screw nuts can comfortably handle loads up to 50 kg, but they can be designed to manage up to 150 kg loads. On the other hand, bronze leadscrew nuts can handle several tonnes.
Speed
The second most important factor in power screw selection is speed. The speed at which a nut rotates or translates can be controlled by its helix angle and diameter. A small helix angle and large diameter will reduce the linear and rotational speed respectively.
Low speeds mean low operating temperatures, preventing any need for reducing the duty cycle. Operating speed is limited by the critical speed of the power screw. When exceeding this critical rpm (revolutions per minute), excessive shaft vibrations will affect the function and safety of the components. It is generally recommended that the operational speed does not exceed 80% of the evaluated critical speed.
Pressure-velocity factor
Pressure-velocity or the PV factor is an important parameter that expresses the actual load on a power screw. It is the combination of contact surface pressure and sliding velocity between the screw shaft and the nut. It is the key design parameter for lead screw assemblies using polymer nuts.
As the load increases, the rpm must be reduced to prevent permanent damage due to frictional heat. The opposite is also true, more speed means less available load capacity.
By ensuring that the actual PV value is less than the PV limit of the chosen material, we can warrant a longer service life.
Lubrication
Lubrication can be an issue with power screws, especially with those working under heavy loads and/or high speeds. The service environment conditions would need to be evaluated to make an appropriate selection in this regard.
In environments with high debris or particulate concentration, contaminated grease can actually cause abrasion. But lubrication is still necessary to prevent overheating, increase loading potential and improve service life.
In such cases, one option is to either clean the grease along with the particles and reapply the film. Or use a dry film lubricant. Even bronze nuts with self-lubricating features need damping grease for satisfactory function. Analysing the service environment and the functional demands will help with selecting the appropriate power screw for your application.
Besides the above-mentioned factors, parameters such as backlash, service life, efficiency, accuracy, repeatability, material, resolution and the extent of customization required can help further narrow down suitable choices when selecting lead screws.
Advantages of Lead Screws
Disadvantages of Lead Screws
Many automation environments rely on motion-driven applications. These often have to convert one type of motion, such as rotary, into another type of motion, such as linear. This is where screws come in. They can be either ball screws or lead screws, but both comprise a cylindrical metal shaft coupled with a screw, to form a mechanical linear actuator.
The screw shaft is a rod with either single or multiple grooves carved in it, which spiral around it in a helix pattern. This forms the external thread. The thread is the means by which the rotational motion is converted into linear motion. This happens when the nut slides along the screw shaft. To do this, a lead screw nut mates its internal thread with the screw shafts external thread. A ball screw employs recirculating ball bearings to perform the same function.
A lead screw is a threaded nut with a cylindrical section. It can either be made from a metal, such as bronze or stainless steel, or a polymer composite. Either the screw shaft is driven to turn while the nut travels down its length, or the screw shaft remains static and the nut turns instead. Lead screws require you to mate the threads, so you need to determine whether nuts and screws have male or female threads. The threads are cut deeper and the two parts generally require lubrication to function effectively.
Both shaft and nut are directly engaged by means of the mated threads, and the helical design guides their movement. Both parts are continually sliding against each other over a fairly extensive contact area, which causes a lot of friction. This leads to greater energy losses, although lead screw thread design is changing to help address this problem.
Lead screws are typically used for lighter-duty or more compact applications. They can more easily be customised and are therefore good for OEM applications. The most common objection to lead screws is that they are slower, less accurate, and lack rigidity or precision.
A ball screw deals with the friction problem between the screw shaft and the nut by using ball bearings. Because the balls are continuously rolling inside the nut, the friction associated with sliding is vastly reduced. On a ball screw, the nut and the screw are carved with matching helical grooves that form ball races, in which the ball bearings recirculate. The rolling balls reduce the amount of direct mechanical contact taking place inside the screw assembly. Substituting rolling friction for sliding friction makes the power conversion infinitely more efficient.
A ball screw nut is comprised of a cylinder with the ball bearings inside it and the system by which they are recirculated. It also has internal ball grooves that match the screw shaft grooves. The balls are generally made of steel, and these form the contact points between the nut and the screw shaft. The number of these contact points can be determined by their groove profile. The most common designs are the circular arc profile and the gothic arc profile.
The circular arc profile has a semicircular shape that permits one contact point for the ball on the nut and one on the screw shaft. The gothic arc profile is more common, with two intersecting arcs permitting two contact points for the ball on the nut and two on the screw shaft.
Ball screws and lead screws are both types of mechanical actuator, and each type has its own advantages and disadvantages. On the face of it, lead screws are just cheaper. However, choosing the right type of screw to use in your application is a lot more complicated than that.
Lead screws are generally unsuitable for applications demanding high speed or throughput, or those with long or continuous cycle times. However, manufacturers are now producing precision lead screws that offer significant increases in accuracy. The newer generation of lead screws leverages material composition technologies and advanced thread-rolling processes. This results in lead screws that begin to match ball screws for precision and repeatability.
Whether you choose a ball screw assembly or lead screw assembly in your linear motion actuator depends on what you are using it for. What are the critical parameters of your application? Will it be influenced by factors such as operating temperature or speed?
One of the most important factors you need to determine is how precise and accurate it must be. If precision is crucial to your application, youll probably go for a precision-engineered lead screw or a ball screw.
On the whole, ball screws are preferred for applications that demand:
Traditional lead screws are usually chosen for simple transfer applications, where these factors arent so critical.
Before choosing between a ball screw or a lead screw for your application, you need to figure out each one's distinct characteristics and how they best match your specific needs. There will inevitably be some compromise, depending on your application. To start with, the assembly design and materials are always important, not just accuracy. Some other important variables might include efficiency, longevity, maintenance, noise and wobble error. In most cases, the choice of ball screw or lead screw will be determined by evaluating the accuracy, load, and lead required by your application.
For more information, please visit Lead Screw And Nut Assembly Manufacturer.
Previous: Key Questions to Ask When Choosing Your Next Smartphone
Next: Which Aluminum Fabrication Process is Best for Your ...
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!
All Comments ( 0 )