10 Things to Consider When Buying segmented vs turbo blade

If you are looking for more details, kindly visit segmented vs turbo blade.

A diamond blade is the finest instrument for slicing through strong materials like stone, porcelain, concrete, asphalt, and more. Even though diamond blades are referred to as cuts, they grind through materials. The blades are made of synthetic diamond particles combined with several powdered metals to form a solid bond. This composition combines a strong steel core to create a tough blade ideal for industrial and construction applications.

In this article, we'll describe the many categories of diamond blades and offer some general advice for using each one.

Diamond Blades

For non-metallic, abrasive materials like concrete, stone, ceramics, and other challenging materials to grind, diamond is the right option. It is less effective than CBN at cutting steel and metals. A premium diamond blade is required whether sawing concrete, drilling holes in porcelain, or creating precise cuts in fiberglass.

The benefits of employing diamond blades are numerous, and they outperform traditional abrasive wheels and other cutting blades that cannot make precise cuts. The right diamond blade for cutting stone should be chosen just as carefully as the right saw. Diamond blades provide long service life and quick cutting when properly matched to the task. However, using the wrong knife or a saw that rotates the edge too quickly can reduce blade life and cut costs.

Diamond blades come in the proper sizes and performance ranges, but choosing the right edge is difficult. Depending on quality, blade prices range greatly and might reach thousands of dollars. Although getting a less expensive blade may be tempting, it is probably smarter to choose a more expensive, high-performance blade that is made to last longer.

Many things, including influence blade's life

• Saw speed

• Concrete characteristics

• Blade quality

Productivity and economy can be increased by understanding how a diamond blade functions and the characteristics that determine blade life and performance.

Types Of Diamond Blades & Their Uses

Here are three different types of diamond saw blades and their applications.

1. Segmented Rim Blades 

Overheating is one of the most serious issues with diamond saw blades. Your resources will be crucial, so decide which saw blade you want to use. When you don't have access to water to cool your blade, the segmented rim blade comes in handy.

This blade type often has a deep groove between 10 to 14 segments. As previously said, this blade can be a viable choice if you don't have access to water because the tracks in the rim allow for enough heat transfer.

Careless use of the blade can cause it to become too hot. These blades are frequently employed for grinding bricks and concrete.

2. Turbo Rim Blades 

Due to the segmented rim blade, the turbo rim blade has several characteristics in common. The anatomy of the blades is essentially the same, even if they appear to be very different. The turbo rim blade is divided into pieces for better heat transfer and contains relief holes.

For more information, please visit what is a diamond blade used for.

One of the key differences between the turbo rim and the segmented rim blades is how the turbo rim handles heat. Wet or dry running of the turbo rim is common because the grooves on the segmented rim blade provide for improved heat distribution, and the holes within the blade function similarly to an equivalent.

The turbo rim can cut brick and concrete and functions very similarly to the segmented rim blade. The turbo rim can also cut thicker limestone materials, unlike the segmented rim. Compared to movies with segmented rims, which have broken inside the rim, this one is crisp and clean-framed.

3. Continuous Rim Blades 

Since there is no built-in heat distribution or fan-like characteristics to pump air over the blade, this sort of blade is commonly referred to as a "wet cut blade." Due to the lack of an internal heat distribution system, these blades are typically relatively flat and have few features. You would operate these blades with water flowing over them. The water is used to wash away dust from the surrounding area, keeping your equipment clean and extending its lifespan.

While cutting marble, granite, porcelain tile, and ceramic tile, the continuous rim blade may provide a clean edge. Additionally, it is one of the slowest cutting blades available for this type.

Hope this article will assist you in selecting the most suitable diamond blade for your project.

Read More: Diamond Vs Bonded Cut off Wheels

nelsonxn

Registered User

Join Date: Dec 2021

Location: Michigan

Posts: 47

BTW, the mesh rim blades are still considered to be continuous rim as well, just with a mesh pattern around the rim.

I'm cutting with the Kobalt 10" wet saw. Since I'm cutting 45 degree edge bevels along 32" long porcelain tiles while leaving a 1/16th factory edge, i need the blade to stay straight and not bend or flex out. So i'm also looking for a reinforced hub. The 10" Pearl Turbo Mesh P4 blade, the 10" Kobalt Turbo Mesh Diamond blade, and the 10" RIDGID reinforced hub continious rim blade all have reinforced hubs. However, the Kobalt Mesh rim and the RIDGID continuous rim blades have the largest diameter reinforced hubs identified by the (Kobalt) blue and the (RIDGID) orange circular areas. I would think that those blades would flex or bend the least.


Is this the correct Pearl P4 Turbo Mesh blade - P4 DIA10TT?
Also the hub reinforcement seems small compared to other reinforced blades.



This is the Kobalt Turbo Mesh Diamond Blade, model: CTM10P, i was thinking of buying since it has a larger diameter hub reinforcement area



This is the RIDGID 10" reinforced HUB continuous rim blade i purchased a few days ago but have not used because I'm not sure if the mesh rim reinforced hub blades will perform better than the (non mesh) continuous rim reinforced hub blades.



This is my old continuous blade that came with the Kobalt 10" wet saw. No reinforcement at all.

It appears you both are saying the mesh porcelain blades, like the Pearl P4 Mesh rim blade, should do as good or better job at producing fine straight cuts and straight bevels with little or no chipping as a comparable continuous rim blade - correct?BTW, the mesh rim blades are still considered to be continuous rim as well, just with a mesh pattern around the rim.I'm cutting with the Kobalt 10" wet saw. Since I'm cutting 45 degree edge bevels along 32" long porcelain tiles while leaving a 1/16th factory edge, i need the blade to stay straight and not bend or flex out. So i'm also looking for a reinforced hub. The 10" Pearl Turbo Mesh P4 blade, the 10" Kobalt Turbo Mesh Diamond blade, and the 10" RIDGID reinforced hub continious rim blade all have reinforced hubs. However, the Kobalt Mesh rim and the RIDGID continuous rim blades have the largest diameter reinforced hubs identified by the (Kobalt) blue and the (RIDGID) orange circular areas. I would think that those blades would flex or bend the least.Is this the correct Pearl P4 Turbo Mesh blade - P4 DIA10TT?Also the hub reinforcement seems small compared to other reinforced blades.This is the Kobalt Turbo Mesh Diamond Blade, model: CTM10P, i was thinking of buying since it has a larger diameter hub reinforcement areaThis is the RIDGID 10" reinforced HUB continuous rim blade i purchased a few days ago but have not used because I'm not sure if the mesh rim reinforced hub blades will perform better than the (non mesh) continuous rim reinforced hub blades.This is my old continuous blade that came with the Kobalt 10" wet saw. No reinforcement at all.

__________________
Nelson

Last edited by nelsonxn; 11-15-2022 at

06:42 PM

.

Contact us to discuss your requirements of Segmented Saw Blade 4.5". Our experienced sales team can help you identify the options that best suit your needs.